METAL ROOF MOUNT

The metal roof mounting system is suitable for roofing with corrugated sheet metal, trapezoidal metal sheet. L Feet, hanger bolt are available for foot options, making installation faster, competitive and reliable. Systems are fully compliant with international standards on wind & snow load, making it suitable for a wide variety of climatic zones.
Technical data
  • Application: Pitched roof
  • Roof slope: Up to 45°
  • Building height: Up to 20 m
  • Roof cladding: Suitable for most types of cladding
  • Wind speed: Up to 88 m/s
  • PV module: Framed, unframed
  • Module orientation: Landscape, portrait
  • Material: Anodized aluminum 6005 T5 stainless steel 304
  • Warranty: 12 years

STANDING SEAM MOUNT

The standing seam roof clamps make mounting on folded seam roof particularly easy. The clamps are simply attached to the standing seams. It offers a secure fastening without penetrating the roof sheets, ensuring maximum stability with minimum weight. The variety of system combinations like L-foot, fixed foot or PV module clamp directly, allows it to be connected quickly to all rail components.
Technical data
  • Application: Pitched roof
  • Roof slope: Up to 45°
  • Minimum sheet thickness: 0.42 mm
  • Building height: Up to 20 m
  • Wind speed: Up to 88 m/s
  • PV module: Framed, unframed
  • Module orientation: Landscape, portrait
  • Material: Anodized aluminum 6005 T5 stainless steel 304
  • Warranty: 12 years

RAILLESS METAL SHEET MOUNT

The railless system facilitates the rapid mounting of framed PV modules on trapezoidal metal sheet roofs with minimum thickness 0.8 mm. Only three components are required to install the modules directly to the roof. A base mounting clip is 100 mm or 140 mm long, therefore easy to carry and attach to almost all trapezoidal and sandwich roofs. The EPDM sheet is in the package to seal the screw against the metal sheet. Railless mounting system allows easy logistics, cost-effective warehousing and easy mounting.
Technical data
  • Application: Pitched roof
  • Roof: Trapezoidal sheet, sandwich roofing, standing seam
  • Roof slope: Up to 12°
  • Building height: Up to 20 m
  • Wind speed: Up to 60 m/s
  • PV module: Framed
  • Module orientation: Landscape, portrait
  • Material: Anodized aluminum 6005 T5 stainless steel 304,410
  • Warranty: 12 years

TILE ROOF MOUNT

The tile roof mounting system offers perfect solution for installation on tile roofing. The roof fastening is done using highly-resistant stainless steel roof hooks, which is suitable for nearly all coverings, such as pantile, plain tiles, slate tiles etc. Systems are fully compliant with international standards on wind & snow load, making it suitable for a wide variety of climatic zones.
Technical data
  • Application: Pitched roof
  • Roof slope: Up to 45°
  • Building height: Up to 20 m
  • Roof cladding: Suitable for most types of cladding
  • Wind speed: Up to 88 m/s
  • PV module: Framed, unframed
  • Module orientation: Landscape, portrait
  • Material: Anodized aluminum 6005 T5 stainless steel 304
  • Warranty: 12 years

TRIANGLE
ROOF MOUNT

Delta triangle mounting bracket is a newly developed product for flat rooftop installation more cost-effective than the traditional ballast mount. It can be installed on roof clamp or penetrate into concrete, or using concrete as ballast. Fold design allows easy transportation, cost-effective warehousing and easy mounting.
Technical data
  • Application: Flat roof, open terrain
  • Tilt angle: 10°, 15°, 20°, 30°
  • Building height: Up to 20 m
  • Snow load: Up to 99 cm
  • Wind speed: Up to 60 m/s
  • PV module: Framed, unframed
  • Module orientation: Landscape, portrait
  • Material: Anodized aluminum 6005 T5 stainless steel 304, 410
  • Warranty: 12 years

RAILLESS BALLASTED MOUNT

The railless ballasted roof mounting system is suitable for commercial flat rooftops, a south-oriented racking solution, for mounting framed modules on flat roofs with 5° to 10° mounting tilts. Variable ballasted weight allows local wind rating requirements to be met on an individual basis. Eliminating rails equate to just a few boxes per system, without the inconvenience of long, cumbersome rails. The simple and straightforward installation process of the system can save time and reduce the labor cost.
Technical data
  • Application: Flat roof, open terrain
  • Tilt angle: 5°, 10°
  • Inter-row spacing: 400 mm recommended
  • Building height: Up to 24 m
  • Wind speed: Up to 60 m/s
  • PV module: Framed, unframed
  • Module orientation: Landscape recommended
  • Material: Anodized aluminum 6005 T5 stainless steel 304, 410
  • Warranty: 12 years

ADJUSTABLE
TILT MOUNT

The adjustable tilt roof mounting system will easily fit different flat roof or open terrain applications, due to its variable tilt angle and footing options for both roof clamp and roof penetration. The system can be used as fixed tilt or adjustable tilt, allows project-specific adjustments and solar power output optimization. The innovative design and high pre-assembly eliminate the need for on-site cutting, welding and enable quick and easy PV module installation.
Technical data
  • Application: Flat roof
  • Tilt angle: Fixed, 10-15°, 15-30°, 30-60°
  • Roof slope: Up to 45°
  • Building height: Up to 20 m
  • Wind speed: Up to 88 m/s
  • PV module:  Framed
  • Module orientation: Landscape, portrait
  • Material: Anodized aluminum 6005 T5 stainless steel 304, 410
  • Warranty: 12 years

Get In Touch

If you are interested in working together, send us an inquiry and we will get back to you as soon as we can!
Contact